 |
|||
LAWAS INDUSTRIAL LUBRICANTS |
|||
1) Turbine Oil :- |
|||
Lawas Turbolube - 32 / 46 / 68 oils are formulated from high quality additives and highly refined selected base stocks. Their performance is further promoted by addition of anti – oxidants, Rust – inhibitors, and anti – foaming agents. These are recommended for all types of turbines like steam gas and Hydraulic systems. |
|||
1) Circulating and Hydraulic Oil |
|||
| a) Lawas Hydroline 15/22/32/ 46/ 68/ 81/ 100/ 121/ 150 / 220/ 257/ 320/ 460 are premium quality anti – wear type of hydraulic Oils. The range contains anti – corrosion, anti – oxidation, anti – wear, anti – foam additives specially selected to maintain good air- release properties. Theses oils are recommended for use in general hydraulic systems, enclosed gear boxes, Vaccum pumps, circulating oiling systems. | |||
| b) Lawas Hydroline HLP – 32/ 46/ 68/ 100 are premium hydraulic Oils having outstanding lubrication characteristic and anti – wear properties, excellent thermal and oxidation stability. These grades specially permitted with high quality base oils and selected additives to give good performances. Recommended for hydraulic Systems having vane type pumps where high loaded pressure properties are required. | |||
| c) Lawas Hydroline HVI – 32/ 46/ 68/ 100 are specially developed for earth moving equipments. These products having very high viscosity index and selected additives packages gives outstanding performance in high pressure and heavy loaded conditions. It is ideal suitable for all types of earthmoving machineries where they having hydraulic systems. | |||
3) Gear Oils :- |
|||
Lawas Macoma EP 68 / 100 /150/ 220/ 320/ 460/ 680 are premium quality, general – purpose gear and bearing lubricants. They are lead- free EP lubricants and are protected against foaming; they separate readily from water and are non – corrosive to steel. This gear Oil are recommended for heavy loaded gear sets including worm and industrial hypoid units prevention of metal contacts and increases the life of gears. |
|||
4) Compressor Oils :- |
|||
Lawas Compress 68 / 100/ 150/ 220 are specially developed for compressors to provide satisfactory lubrication in high temperature and load conditions. This oils is blended with selected base oils anti – oxidants and rust – inhibitors to give low carbon forming tendencies in air – compressor applications. |
|||
5) Machine Toolway Oils :- |
|||
Lawas Toolway S32/57/68/100/220 These grades have been formulated to impart special frictional characteristic that overcome the stick – slip motion, ordinarily associated with slow moving machine parts. They are also fortified with mild EP and rust preventive properties. These oils are recommended for slide way lubrication of Planner, grinder, horizontal boring machines, shapers, jig borers etc. involving high precision work and are also recommended for lubrication of gear by oil can. |
|||
6) Spindle Oils :- |
|||
| Lawas Spinrol 5/12/22 are low viscosity spindle oils blended from high 6 base stocks possessing excellent chemical & Oxidation stability and further fortified with carefully selected oxidation and rust inhibitors, anti – wear and anti – foam agents to provide good strength to oil film, good demulsibility, high chemical stability, lower fluid frictions & resistance to rust and corrosion. Recommended for textile and machine tools, spindle bearing, timing gears centrifugal separators and hydraulic systems of certain high precision machine tools. | |||
7) Steam Cylinder Oils :- |
|||
| Lawas Cyl 460/ 530/ 680 this oil is recommended for steam engine operating under saturated steam conditions. These oils are widely used in calendar bearing & sugar mills rolls bearing & also recommended for lubrication of worm gears, this oil has excellent oiliness & film strength properties. This oil resists water washout and minimize deposit formation even at elevated temperatures. | |||
8) Greases : - |
|||
| a) Lawas Lithom EP 0/00/2/3 these are high-grade lithium soap base grease containing extreme pressure additives. They have excellent thermal and mechanical stability, protect from corrosion and oxidation. They are water – resistance having high load carrying capacity. Recommended for automotives bearings, earth moving equipments, Gear couplings, electric motors and heavy mining machinery. | |||
b) Lawas Grease HT / HTM these are non - soap greases having unique properties to give advantages our soap type thickeners. They ate extremely stable at high temperature, water resistance, shock load absorbing and not affected by acids and alkalies. Recommended for plain and anti – friction bearings at high temperature under shock loads and lubrication of machine elements. |
|||
|
|||
 |
Humraaj MG 20 W/40 (Diesel & Gas Engine Oil) |
|
Sugam 20 W/ 50 Engine Oil |
|
Humraaj GEO 20 W / 50 (Gasoline Engine lubricant) |
|
Koolmi Coolant Oil |
|
Brake Fluide Dot 3 |
|
Gear Lube EP 90 |
more . . . |
| Greases | High Temperature Grease | Fuel Additives | Lubes Greases | Turbine Oil | Compressor Oils |
| Circulating Oil | Machine Toolway Oils | Spindle Oils | Soluble Cutting Oil | Synthetic Cutting Oils | Honing Oils | Broaching Oils |
| Rust Preventive Oils | Quenching Oils | Thermic Fluid Oils | Rubber Process Oils | Metal Drawing Fluid Oil |